List Price: $18.95
Sale Price: $13.66
Today's Bonus: 28% Off
I had to fabricate my own mounting clamp for this for 2 reasons.
1. clamp that came with the unit was too small for my 09 Honda VTX 1300R.
2. the holder itself looked weak due to plastic construction, VTX 1300 vibrates a lot.
3. it's larger(the lighter/socket assembly) than the photo shows and I needed the extra length to the holder for clearance.
The weatherproof cap is not too snug so, it may be better to leave the lighter in place. At least it'll keep the rain/water from going into the socket.
The wires that's supplied is way too short for handlebar mount, unless you want to splice into your existing system, like headlight, that comes on when the ignition is turned on...hey, when the lighter is not used, it won't draw any current any way so why cut into the wiring? Just get some extra wires and connectors and go direct to the battery positive terminal. You can put the ground(black wire) anywhere metallic.
For whatever accessories you plan to use this, make sure you have the right fuse installed for universal use. My rule of thumb is 150% of max amp the device uses. example: If device draws 1 amp max, I'll put in a 1.5 amp fuse. You might want to have some extra sizes handy for various devices, if possible. A 1 amp device with 10 amp fuse installed to be used for the most powerful device you got is NOT a good idea!
Click Here For Most Helpful Customer Reviews >>
The first thing that caught my attention, was the very-well written instructions. The assembly is very rugged and except for the exposed back-end should weather storms. With this being advertised to be handlebar mounted, it got me questioning why the manufacturer would leave the electrical wiring unprotected instead of somehow putting the connections inside somekind of screw-on sleeving. They do try to cover their tracks with a weak disclaimer in the instructions--something to the effect of "mount this in weather-proof area", but come-on, this is suppose to be mounted on motorcycle bars! Anyways, I slapped on a thick layer of liquid electrical tape around the entire back end and PRESTO the perfect 12V power socket.
No comments:
Post a Comment